Plant Observation Entry
you can view, enter or edit a plant observation record.
Every record has a point location. A record
might also have
Example: Ron Vanderhoff's record of
Lycium californicum, California boxthorn,
Adding a New Record
2. Choose an Organization. The choice of organization determines which projects are available. If you choose the Independent organization, three projects are available: Simple data collection, Advanced data collection, and Rare plant data collection. If you are part of a Weed Manager organization, other projects will be available.
3. Choose a
Choice of project determines which dynamic form appears in
B. Alternatively, if you have exact coordinates from another source, press
5. Choose a plant by typing a few characters into either
or Common Name,
and selecting a plant from the drop down.
6. To add a shape, press
7. To add a photo, press
8. Fill in values for any of the other fields in Section 4. If you drew a polygon, press calculate next to Gross Area.
9. Press SAVE. Required values are indicated by *. If any required field values are missing, the application will let you know.
Adding a New Assessment of a Previous Record
NOTE: If the existing record has a polygon, you can use exactly the same polygon in the new assessment, or start with a copy of the existing polygon and modify it for the new assessment, or start from scratch and draw a new polygon.
if you want the new assessment to use exactly the same polygon. (If you change this polygon later, the changes will appear both in the existing record and the new assessment, since the same polygon is attached to both records.)
if you want to start out with a copy of the existing polygon, and modify it for the new assessment.
Viewing a Record (how the page is organized)
The right side of the page is devoted to a map.
The left hand side is scrollable, and organized into four sections.
The record header shows
what the application is doing at the moment
(viewing an existing record, editing an existing record, or
adding a new record).
Header: The record header shows what the application is doing at the moment (viewing an existing record, editing an existing record, or adding a new record).
Record ownership and control
At the bottom of Section 1 are control buttons.
If you are viewing your own record, press the EDIT
button in order to make changes.
If you are a contributor, press the NEW RECORD button to
add a new record.
and Point Location
If a shape (polygon or line) is defined for this record, a red oval appears. If a point is defined for this record, a blue point appears.
Note that on the map, the blue point indicating the location of the record is independent of the map cursor, . You can move the map cursor without changing the location of the record.
The dynamic form associated with the current project
The dynamic forms that appear in this section correspond to the dynamic forms available in the Observer Pro phone application.
For instance, suppose you make an observation with Observer Pro with the Independent organization and the Advanced data collection project, which uses the ADVANCED DATA COLLECTION form. When you view that record with this application, the same form will appear here in Section 3.
For records that have no project, this application uses a default dynamic form which has the same fields as the earlier Calflora observation entry applications.
At the top of this section, the name of the form is written in green. Dynamic forms differ from one another as to which fields they contain. However, all dynamic forms start with these four fields:
Other fields which may be present in a dynamic form include:
* indicates that a field is required.
|Section 4: Photos and other fields not included in dynamic forms|
|Photos||Any photos of this particular population. During editing, you can attach a photo to a record by uploading it from your computer. Or, if your photo is already on the web, you can paste in the URL.|
The earliest record of a population has no management status.
A subsequent assessment of that same population will be
automatically assigned a management status of verified.
Suppose you are looking for a particular plant population at a precise location that was recorded in a previous year. If you do not find it, you could enter a record for that plant at that location and specify the management status as searched for but not found.
If the population is being treated, you can specify the management status as under management / treatment. If the treatment is successful, you can specify the management status as extirpated.
Or, if you are doing a survey, and did not find a particular plant
in the survey area, you could enter a record for that plant in
that area and specify the management status as
searched for but not found.
|Natural Status||Was the observed plant growing wild, or was it planted by a human?||Note that only records with a Natural Status of wild are included in search results from applications such as Observation Hotline.|
|Collection||Use this field to divide your records up into various collections. Or, include search terms in the value of this field that will make it possible to categorize records later.|
|Region||For some Weed Manager groups collecting data with the Observer Pro phone app, the value of region will be automatically assigned to the name of one of a set of pre-defined regions. If you are using POE as an Independent, you can ignore this field, or use it to describe the general area where you observed the plant.|
|Ownership||(AKA National Ownership) A broad classification of who owns the land where the plant is growing.|
|Plant Identification||The primary method by which the observed plant was identified. (If you are entering a record and are not sure of your identification, choose uncertain.)|
|Elevation||The elevation at the point location of this population. During editing, once a point location has been chosen, press lookup elevation to find the elevation.|
|Location Accuracy||An estimate of the accuracy of the location coordinates, expressed as an area in square meters. For instance, if the location accuracy is set to 100 square meters, then the idea is that the real point is somewhere within that 100 square meter area.|
The size of the area where the population was observered.
If you have drawn a polygon, press calculate area to calculate the area of the polygon.
If you have specified a Radius as a buffer around the point, press calculate area to calculate the area of the implied circle.
is the area of ground covered by the patch of plants,
if you drew an imaginary line around the outer boundary of the patch.
If Percent Cover is also recorded, then Infested Area can be calculated as
|Herbarium||If a specimen of the plant was taken and sent to an herbarium, the name of the herbarium.|
Fields Populated when a Record Comes in from Observer Pro
|Access||Set to unpublished.|
|Index Date||Set to the moment when the record is added to the database.|
|Observer||Set to the name of the person who is logged into Observer Pro, if it does not already have a value.||Typically, the value of Observer will be the name of whoever is using Observer Pro. On some dynamic forms, this field is exposed, and the user can enter a value.|
|Observation Type||Set to undirectedsearch if it does not already have a value.|
|Documentation Type||Set to reported.|
|Natural Status||Set to wild if it does not already have a value.|
|County||Set to the name of the appropriate county if the point location of the record falls within the boundary of a California county.|
|Organization||This will be the Organization chosen by the user when entering the record in Observer Pro.||If the user has selected a default group for new observations in My Calflora / Preferences, then, when the user enters an observation as Independent in Observer Pro, Organization will be set to the selected default group.|
If Number of Plants is 0,
Management Status is set to searched for but not found.
Otherwise, if there is a value for Treatment Method, Management Status is set to under management.
Otherwise, if the record is a new assessment of an existing record, Management Status is set to verified.
|Region||Some Weed Manager groups have a set of regions defined (polygons of management areas). If the record belongs to one of these groups, and the point location of the record falls within one of the defined regions, Region is set to the name of the region.|
|Location Accuracy (square meters)||
If the record coming in from Observer Pro has a value for
Inside Observer Pro,
Set to an appropriate value
(LOW, MEDIUM, HIGH)
depending on the value of |
|Gross Area||If Radius (in meters; a buffer around the point) is present in the dynamic form and has a value, then Gross Area is set to the area of the implied circle.|
See also About Contributing Plant Observations FAQ
For more information about map background layers, see Layer Help.
Plant Observation Entry is part of the Weed Manager system. For more information on the design of the system, please see
Example: Cindy Roessler's record of
August, 2017: v. 4.22:
Introducing the population record, including a reference polygon, described
When a history stack has polygons, a population record is automatically
created for it.
October, 2016: v. 4.01:
The link to Work Session Entry in TOOLS has been replaced.
To edit the hours associated with a record, click on
and an embedded version of Work Session Entry just for the
current record will appear.
It shows any hours of work now associated with the current observation record.
April, 2016: v. 3.91:
When POE is showing a treatment record, the record number at the top
of the page is written in DARK RED.
This should make it clear that you are looking at a treatment record
without having to scroll down to see the treatment fields.
Inside of History,
the record numbers of any treatment records are also
February, 2015: v. 3.44: If you are editing a record with photos, and the photos are stored on Calflora, you can rotate a photo clockwise or counter-clockwise by 90 degrees. Click on the photo to open the edit panel, and then click on the arrow for which way you want to rotate.
December, 2014: v. 3.27:
When you are looking at a Weed Manager record, there is a link in TOOLS called
Work Session Entry
which goes directly to the work session entry app,
already dialed into the organization, project, and date of the record.
If work session records have already been entered for this project
on this date, you will see them; otherwise you can enter them.
September, 2014: v. 3.13:
Coordinates can be typed in directly, in decimal lat/long format.
August, 2014: v. 3.12:
Nearby polygons are displayed.
July, 2014: v. 3.01 (beta) released.